CV Relay

Sequential switches are popular tools in the modular synthesizers world. They are great tools for experimenting and exploring with sort of signals and/or sounds.

This is why this device’s name could be misleading, we did not limit this device to CV..... :)

In a nutshell: Up to 8 separate inputs (CV or Audio in mono or stereo) One selected input is relayed to the output. Manually or when the device receives a trigger, another input is selected and relayed to the output. It sounds easy and simple, but the best things usually born from the simple things.

The knob of the channels are attenuverters for the input signals

• Up to 8 input channel/step
• Enable/disable options for each input channel/step
• if a channel is disabled, then this channel will be skipped when the “Step” triggered
• Attenuverters for each channel
• for audio signals also. So when the knob are in the negative range then the signal will be phase flipped.
• Can be working as a CV step sequencer
• If CV input cable is not connected for a channel, then the attenuverter knobs works as a value knob
• Numbered buttons for selecting directly a channel/step
• Home channel
• One of the channels can be marked as “Home”, and “Home” gate signal holds the step on this channel.
• Various step directions
• Step direction can be set by a probability knob, or the step can be a random selection.
• Step and Home control by UI buttons, CV or MIDI
• white keys are step triggers
• black keys are hold gates
• MIDI and CV control can be enabled/disabled

Verion history

• 1.0.1 Initial release
• 1.0.2 Stereo fix, back panel graphics fix